Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,877 Posts
Yep you need to hold fast the inner assembly whilst releasing the Allen bolt in the bottom of the leg otherwise when the Allem bolt loosens it all turns :mad:

A simple DIY work around is to get a Broom handle or similar round wooden widget and Taper the end down to about 3/4" and tap this into the leg to hold the inner, It may help to get an assistant as your gonna be strapped to hold onto the Piece of wood keeping pressure into the Inner and undo the Allen bolt.

If your lothed to destroy your Witches Ride then sneak a Drape pole out of the house when the Wifes Washing up as these make a good substitute.:mrgreen:

Don't blame me thou if you get caught


 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top