1996 Vulcan Classic 800 won't start
Join the discussion
Recommended Reading
-
WEZMOTO brake lines beware!
The Mechanics CornerI purchased a set of these off ebay and they looked cool enough and the price was right so I pulled the throttle and purchased them. They arrived from England and I got to work to install them. Once I got the old lines off I noticed they had the ends turned the wrong direction and that they were...- 13
- 18K
-
GPz 750 Rod Bearings
The Mechanics CornerHi All: If you look at the Partzilla (or the actual Kawasaki ) web site in search of crank bearings for the '83 GPz 750 you will see that there are multiple part numbers. Three sizes for crank main journals and three sizes for connecting rod big end. 92028/92028A/92028B are the main crank...- 1
- 308
-
ke100 no spark
The Mechanics CornerI have a '73 KE100, oil injected 2-stroke. I've owned it for years and it always ran great, just like a chainsaw. It didn't start last week and as I investigated, I found that it doesn't have any spark and thought a good place to start would be to get a new coil. Does anyone know if it would...- 3
- 2K
-
Hey guys i have a 2008 vulcan 900 classic. I have had bike 2 years .after i purchased itabout a year i had to bypass ignition and use resistor to star
The Mechanics CornerResistior to start bike ,been cranking every since til this summer ..went to ride one nice day and crank bike easily and pulled down to house to finish gearing up and got back on bike idling and bam she died ..hasnt cranked yet ..ive replaced relay .but first no power any where then 8i replaced...- 0
- 286
Join now to ask and comment!