[CustomCreated]

Ok so I have a vn800a that is getting no spark. I have replaced every part in the system coils junction box starter relay. The kick stand safety switch is gone the neutral safety switch is bypassed. Replaced the ic igniter. Kill switch is fine clutch lever wires are good ignition switch is new. Get power to the whole bike what am I missing any help would be great thank you.

 

[Ropp]

Have a look at this might help,new ignition switch could be the culprit ,is it OEM?

vulcan 800 no spark

Hey there, I'm working on a Vulcan 800 that's been bobbed. The guy deleted the cluster, turn signals, yada yada yada, well now it has no spark. The wire harness is a used, but good condition stock one. The coils have been tested and are good, wires are good, plugs are good. The stator, pickup...

www.kawasakimotorcycle.org

 

[WFO-KZ]

You say the kick stand safety switch is gone, but has it been bypassed electrically?

 

[CustomCreated]

You say the kick stand safety switch is gone, but has it been bypassed electrically?

Yes I cut the wire and twisted them together

 

[WFO-KZ]

I see you replaced the ignition coils but I don't see mention of replacing or testing of the pickup coils.
I assume all other wiring between components has been checked?