Kawasaki Motorcycle Forums banner

1 - 2 of 2 Posts

3 Posts
Discussion Starter #1
I changed the oil filer and oil.
Manual and every reference I can find says 1.9qts of oil.
I put 1.9qts in and the dip stick was showing very high.
I ran the Mule, let it sit overnight, used if for two days and checked now and again.
Still showed very high oil level on dip stick.
I drained and drained oil until oil level was right at the top of the full mark.
After a day of use, now the mule has no power. Starts and idles fine but won't go fast and struggles with any kind of incline.
I added 1/2 qrt of oil and same thing.
Now I don't know what's going on and if the oil and loss of power are even related.
Any ideas?
1 - 2 of 2 Posts