Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,512 Posts
Make sure the cable is the problem. All you need to do is remove the gauge on the tank and unscrew the cable at that end, as well as at the wheel. I hate using them but a pair of vise grips were about the only thing I could find that worked to get them off.

The cable kind of resembles coaxial cable, there is an inner cable and an outer sheath. The inner cable turns as the gears on the wheel turn. Make sure the cable is broken, twisted off, etc before you replace it. You'll probably be able to tell if its in working order.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top