accelerator pump diaphram recall
Join the discussion
Recommended Reading
-
Seat question
Kawasaki CruisersI did some research on here but did not see anything that answered my question. I am 6'8" and owned a 2006 Classic and just traded it in for a 2008 Nomad. I found out the hard way I need a taller windscreen but the question I have is this. I HATE my seat on the Nomad and miss my classic seat...- 9
- 707
-
1998 Voyager XII blows main fuse
Kawasaki CruisersHas anyone had problems as soon as you let the clutch out and start rolling the engine dies, try again and the main fuse blows. I have stripped the bike down looking for bare wires and bad connectors and can't find anything wrong. I've taken the ignition switch out and checked all the wires that...- 4
- 124
-
knucklebuster77 · updated
-
Clutch switch bypass
Kawasaki CruisersIm putting Apes on my Vulcan 1500 classic trying to figure out how to bypass the clutch switch at the bars it's a plug with 3 wires anyone have an idea?- 3
- 64
-
Cowboykiller · updated
-
Twisted front end on my 800 Drifter
Kawasaki CruisersEight years ago I left the road inadvertently on my Drifter and hit a big rock, about 3/4 the diameter of the front wheel. I wasn't going very fast, but the sudden stop sent me over the handlebars (or through) and I hit a fence upside down and backward, then peeled off of it (like a cartoon)...- 2
- 95
-
installing radio on 2008 Kawasaki vulcan 900
Kawasaki CruisersHey Guys I am trying to install a radio I bought for the vulcan 900 that have three wires they show on the schematics Green goes to - Red to the + and the black goes to the ignition switch the ignition switch has more than a few wires to does anyone knows if I should connect to the black...- 16
- 292
Join now to ask and comment!