Kawasaki Motorcycle Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
11,339 Posts
The rear signals appear to have mounting holes drilled in the chrome pieces and then I suspect a lock nut is used to secure the signals from rotating.

The front signals might be mounted by either using Kuryakyn "P" clamps or using split industrial shaft collars with a bar between them.
 

·
AlohaMark
Joined
·
206 Posts
Discussion Starter · #3 ·
The rear signals appear to have mounting holes drilled in the chrome pieces and then I suspect a lock nut is used to secure the signals from rotating.

The front signals might be mounted by either using Kuryakyn "P" clamps or using split industrial shaft collars with a bar between them.
So he removed the existing bolt, enlarged the hole and mounted the blinker in the hole using the stock nut? Is that the consensus? I wonder if that works well enough to secure the fender trim piece?
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top