Joined
·
1 Posts
does anyone know the procedure to reset the belt light on a 360praire? the 100hr timer is up so iguess that is why the light come on.
belt light reset ?
Join the discussion
Recommended Reading
-
Vulcan 1500 oil pump
The Mechanics CornerHi guys im new here and from reading on the net it apears KAW have a problem with early 1500s so maybe someone can send me in the right direction! Bike is a 1997 Kaw 1500 Vulcan classic ive had it a few months it only has 18,000 miles on it and it lost oil pressure while ridding on the freeway...- 7
- 11K
-
Aluminum engine degreaser?
The Mechanics CornerI usually use Gunk engine degreaser on my car engines, but I've read that iron engine degreasers are NOT good for aluminum engines! So what is a good product for aluminum? Someone said the Gunk Foamy spray won't hurt aluminum. Correct??- 14
- 9K
-
My Reliable 85 ZN700 has a problem!
The Mechanics CornerYesterday, when I went for a ride on my ZN700, it started bogging when I twisted the throttle and seemed to do it worse in the higher gears. Then, the engine would only rev up high and stay there. I wasn't far from home and managed to make it back by braking to keep the engine rpm down and...- 18
- 968
-
crash bars
The Mechanics Cornerwere crash bars a factory option on a kawasaki kz 440 say from 1980-1983? i seen a set oo ebay for a 1982 kawasaki kz 440, but i'm wondering if their aftermarket or factory...- 15
- 3K
-
Non Start 07 KLX250s.. CDI INFO NEEDED>> HELPPP
The Mechanics Corner2007 Kaw KLX250s 12K Mi. EXC Condition. Rides Perfect when she runs. This is the second time I have had no spark at the plug. Coil does have very faint 2-5 volts. I pulled the CDI off, I have continuity through the pickup wires and connection to the coil. I CAN NOT FIND A SOLID WIRING...- 8
- 4K
Join now to ask and comment!