[MAXIMOMEX33]

I hope someone can help me with this. The blinkers on my 2008 Vulcan 900 won’t work. They don’t even turn on. The fuse is good and all bulbs are good also. I get 12 volts at the blinker connector for a few seconds but then the voltage drops down to 0.34 volts. The flasher is also good, it has continuity. The previous owner had wire the front blinkers wrong, he had 3 wires connected together. He also had replace 10 amp fuses with 25 amp fuses, I don’t know if that has anything to do with it. I took the blinker switch apart and it also looks good. Does anyone has any idea of what the problem could be? I hope someone can help me.

 

[WFO-KZ]

Wow at 25 amps I would start looking for melted wires.

 

[MAXIMOMEX33]

Wow at 25 amps I would start looking for melted wires.

That’s what I’m thinking of doing next but first I’m going to try a new led flasher before I start looking for burn wires.

 

[Ropp]

Dont know if you have the service manual so this might help

 

[WFO-KZ]

Does this mean you are converting the turn signal bulbs to LED or did your bike come stock with LED's?
If you want LED's that's fine but if it were me with a tight budget, I would try replacing the flasher with an OEM one first.

 

[trike]

Wow at 25 amps I would start looking for melted wires.

If you found out about the 25 amp fuze? definitely look for a hot spot? usually at a bend or a turn in the wire mounting? This just a suggestion?