Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

· Registered
142 Posts
93 KX 250 carb settings

The float level should be set at 16 mm plus or minus 1mm, the air screw should be screwed in all the way and backed out 1.5 turns. The stock main jet is a #162 pn 92063-1369 and the stock pilot is a #50 pn 92064-1144. These are standard stock settings and you can adjust them depending on elevation, riding conditions and experience.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.