Joined
·
1 Posts
What should the compression test value (PSI reading) be for a KX 80, and what should it be if it is bore to a 100?
Compression test KX 80 & 100 bore
Join the discussion
Recommended Reading
-
Wanted - Auto Clutch for KX60
Kawasaki Motocross and OffroadHi Im chasing an auto clutch for a KX60, heard about the the berg racing unit, heard pgood things. Wanted one ASAP, if you have one or know someone that may want to sell one, please get in touch with me. Thanks Andy :)- 1
- 1K
-
KDX 200 kicks back
Kawasaki Motocross and OffroadHi my motor was rebuilt started running it in and was running the fuel out of carby then as the rev's got high I thought it could be to much so I held the kill switch but when I let it off it fired back up and got a massive back fire Now it's kicking back up on kick starter when I try kicking...- 1
- 447
-
Need help in removing a plastic fuel tank
Kawasaki Motocross and OffroadHi fellow dirt lovers, I’m trying to remove my Acerbis plastic tank and it looks like the nut embedded in the tank is loose and spin so I can’t get the screw out... Any ideas...? I’ll appreciate any help...- 2
- 369
-
Sharinstuhl · updated
-
1977 KE100 Battery and Fuse Connections
Kawasaki Motocross and OffroadHello, I recently purchased a 1977 KE100. This is my first motorcycle project. The bike did not come with a battery but I have picked one up and have the wiring diagram but I wanted to double check that this was the correct connections there is a blue with white trace wire (from ignition...- 1
- 289
-
1996 klx250r engine noise
Kawasaki Motocross and OffroadOn my klx250r i have a noise when engine is cold and at low rpm. It.s like a valve shim noise when they are worn, except that i have changed them and they are in spec. Anybody can tell what it is? Bike runs perfect, no problem at all.- 1
- 249
Join now to ask and comment!