Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
17,940 Posts
Unfortunately very few shops work on Metrics...not enough of a call for it. Most metric owners only do the bolt on thing, its the HD that can really be customised. Yamaha or Star is startin to get things right with the aftermarket and Corporate customizing parts. Best thing is to find an independent tha works on many bike brands, or do it yourself. Don't know what the spread on the holes for the V2K are,but if they are the same as the 800 then they are the same as the HDs withonly a difference in bolt size. Best thing is to work with a bar bend that is comfortable to hold and then with a friend hold them aboutwhere you want them and then see what the rise and pull back measure. JP Cycles has a lot of bars and a decent diagram of how they measure. Good Luck, its mostly trial and error.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top