I generally leave the gas in the carbs but treat the bike with a fuel stabilizer, the theory being that a bike with no gas in the carbs will allow rubber bits in the carburetor to dry out. I dunno if there's any truth to it.
There should be small brass screws on the bottom of the carbs, probably by a nipple for draining the gas. Be VERY CAREFUL to not strip these screws, they're probably hex screws.
There should be small brass screws on the bottom of the carbs, probably by a nipple for draining the gas. Be VERY CAREFUL to not strip these screws, they're probably hex screws.
