Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

· Registered
11,339 Posts
A set of gapped new sparkplugs, along with a new battery would be what I'd do, followed by replacing the brake fluids in both master cylinders.

New brake lines, along with new tires should be next.
Check the electrical systems connectors for signs of corrosion,the Negative(-) BLACK battery terminal(or what you call Earth) usually goes to an engine mounting bolt, The Positive(+)RED terminal usually goes to the starter solenoid and from it to the starter motor.

All battery related cables must be clean and tight for maximum current flow when the start button is pushed.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.