Freakinout: Q for you
Join the discussion
Recommended Reading
-
2008 Concours - Need Local Help (Houston)
The Mechanics CornerWas involved in an auto accident and bike sat for a few years in the garage. As luck would have it, something (mouse) got to my wirnig harness. Rather than play the splice/test method, I'm looking for someone near or in Houston willing to run a new wiring harness. I'll pay fair price, just...- 1
- 60
-
Challengerbot · updated
-
ZEPHYR 750 FIRK SAG
The Mechanics CornerI have a 91 750 Zephyr with only 5.5k on the clock, I know the front end is sloppy on these bikes as standard however I am not looking to upgrade forks or anything like that, I would just like to ensure what I have is set up correctly. Firstly I will swap the fork oil as it potentially could be...- 9
- 146
-
Staff ZR · updated
-
2006 KFX 400 stalls when coming to a stop
The Mechanics CornerI've been to every forum out there where someone has asked this same question (or something similar) years ago regarding their 400 stalling when decelerating/breaking and the original poster never came back to say what ultimately fixed the issue. So here we go, I'll be descriptive with the...- 2
- 2K
-
Valve clearances
The Mechanics CornerHi all, In my previous post I asked about weeping oil and got some good answers so thanks to those members who replied, whilst I have the top cover off my 1991 750 zephyr 5k genuine mileage I checked the valve clearances. 6 out of eight were at the loose end of tolerance but one inlet and one...- 5
- 438
-
Staff ZR · updated
-
#1 cylinder not up to snuff
The Mechanics CornerI check the exhaust temps on my 85 ZN700 after riding it and the temp of the #1 cylinder exhaust had been getting lower and lower compared to the other 3. I don't ride it that often. So, yesterday I removed the seat and gas tank, removed the idle mix screw, and sprayed carb cleaner down the...- 1
- 124
Join now to ask and comment!