Kawasaki Motorcycle Forums banner

Highway Peg question

1899 Views 10 Replies 8 Participants Last post by  Ken
I've been looking at highway pegs for my 800B. It has the freeway bars with the angled outer bar. Seems like Kuryakyn right angle pegs are the only ones that allow adjustment to a level angle. Was wondering if anyone has installed pegs with longer extensions on the inner vertical bar that hang out far enough? The outer bar is offset forward a bit and may allow a shaft to pass on the rider's side of it. Thanks.
1 - 1 of 11 Posts
The Kuryakyn ISO offset is the most flexible. I have them on my highway bars, but have changed angles and distance in front of the bars severla times to get it the way I like it. If the diameter of the receiving tube matches the clamps and there is enoought room for the clamps, you should be able tl make them work.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.