Kawasaki Motorcycle Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Im new to this message board stuff, but i really need my bike!i took off the last piece of my muffler on my '05 kawasaki zx-6r 636 and i cut the cables to the baffle censor. i started the bike but the cables spooled up into consor now my bike wont turn over. i already jump the censor by connecting the black and yellow wire to the aqua and green wire. that was supposed to leve the baffle open, but it didnt help. i also tried disconecting the negavtive on my battery to reset the ecu, but no luck! i wanna know if theres a way to either by pass that baffle censor or some kind of cheap efficent way to reset the ecu and re-string the censor.
 

·
Registered
Joined
·
1,221 Posts
I suspect you shouldn't have started cutting things. I disconnected everything when I put a Yoshimura on my bike and merely got a FI error light on the dash.
Try putting all the connectors back to stock, including the motor for the exhaust, and see if it starts and just give you an error light.
 
1 - 2 of 2 Posts
Top