Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
I bought some last week they fit great, and ride super confortable. This is for anyone with these controls. Has anyone ever had problems with them hanging up when they shift. The problem is when I shift up or down they hang up. It's not that big of a problem I just have to push them in the neutrel position to be able to shift again. I thought about loosining up some of the joints to see if this fixes it. I was just curious if anyone had the same problem and what they did to fix it. I have bought some other goodies for the meanstreak, and will take pics and post later.

Thanks
 

·
Registered
Joined
·
681 Posts
I ran into the same problem. Here's my fix:

Remove the footpeg, and there will be a washer in between the bracket and the shifter arm. Remove that washer. Remount footpeg securely. Done.

I found that with the washer in I could not tighten the footpeg enough to keep it from spinning, without binding up the shifter.

That should fix it, like I said, it did for me.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top