Kawasaki mule 610 fuel issues

1 - 1 of 1 Posts

Rogerdoger

Registered

Joined 27 d ago

1 Posts

Discussion Starter • #1 • 27 d ago

My 2010 kawasaki mule 610 starts fine most of the time but when i give it gas it stalls out, i have cleaned the carburetor, replaced the fuel pump and still the same. I also have fuel coming out of the top of the carburetor while at idle. Does anyone know what the problem is?

1 - 1 of 1 Posts

Recommended Reading

Mule 3000 will not idle

Kawasaki ATV and Mule

Installed new carb on my 2000 kawasaki mule 3000,ran fine now after sitting it will not idle, can someone help me?
- 7
- 98
- V
  vietnmvetr · updated 9 h ago
Kawasaki Mule 610 blowing out dipstick and oil.

Kawasaki ATV and Mule

I've seen a post or 2 on this problem occurring in the winter but I am having this trouble in 90 degree heat. Changed the fuel pump, blew the vent lines out can't solve the problem. Any ideas? I can get it to run & the oil dip stick to stay in place after disconnecting the vent lines & turning...
- 2
- 4K
- O
  oldjoe · updated 1 d ago
1988 mule 1000 Kaf450-b1-- Noises trying to start!!-- Help PLease!!

Kawasaki ATV and Mule

Turn key to start & you hear metallic/grinding/spinning noises. It's not actually firing up/starting,but you hear it turning over, hard to pin point source of noise but it's definitely coming from side cover on motor behind driver seat. Have to take water pump & side cover off the be able to...
- 4
- 557
- I
  Indiana · updated 2 d ago
4010 lost drive to rear wheels

Kawasaki ATV and Mule

Hi there quick question I’ve chance to buy a 4010 at reasonable money but guy says lost drive to rear wheels although will drive off front ones. Is the 4010 better machine than 3010 ? Before I go look at it what could it possibly be or likely to be also is it worth taking On as sounds decent...
- 5
- 206
- R
  Roebuck243 · updated 3 d ago
Bayou 220 Electric starter does not work

Kawasaki ATV and Mule

Hello everyone, new to the forum but I have an issue with my 88’ bayou 220. When I push the start button I get nothing. Bought a new solenoid and can start the four wheeler by using a screwdriver to jump the solenoid by touching the two bolts. Lights and kill switch work on the handlebar so I’m...
- 1
- 478
- jhou1 · updated 3 d ago