Kawasaki Motorcycle Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I have a '77 KZ1000. Problem with the gears. Taking the engine apart, and I ran into a big snag. I can't get the chain sprocket off, which I need to do to get the engine out of the frame.

Just making sure---the nut turns counter-clockwise, correct.

Any tips on braking the nut free?

Jacky
 

·
Registered
Joined
·
2 Posts
hello, use a 24mm socket single hex, with an impact wrench or have someone apply the rear brake with lots of pressure, it will break free for sure, turn to the left. good luck. z-1 fan
 
1 - 3 of 3 Posts
Top