Kawasaki Motorcycle Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
4,516 Posts
Not sure how much help this will be, but here's a how-to link for replacing the sight glass on some other Japanese models. http://www.xj4ever.com/choosing a sight glass.pdf

PS: I don't know what size the 1300 sight glass is, but the Fr brake sight glass orifice on my 81 KZ650-CSR is ~25mm. And the csr oil level window is also about 25mm, so I kinda wonder if the oil level window could be used in my master cylinder.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #9
Thanks for the comments, will try the ebay guy, i have successfully removed said glass but cannot find the correct size for replacing hopefully he can help me out.cheers
Not sure how much help this will be, but here's a how-to link for replacing the sight glass on some other Japanese models. http://www.xj4ever.com/choosing a sight glass.pdf

PS: I don't know what size the 1300 sight glass is, but the Fr brake sight glass orifice on my 81 KZ650-CSR is ~25mm. And the csr oil level window is also about 25mm, so I kinda wonder if the oil level window could be used in my master cylinder.
 

·
Super Moderator
Joined
·
1,187 Posts
Have you measured your sight glass? It would be great to post that info here for anyone who might attempt this in the future? Diameter and thickness info would be appreciated. Did your have an O-ring?
 
1 - 10 of 10 Posts
Top