Kawasaki Motorcycle Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
<a href="http://s848.photobucket.com/albums/ab49/Jkoral/Bike%20build%202010/?action=view&current=before1.jpg" target="_blank"><img src="http://i848.photobucket.com/albums/ab49/Jkoral/Bike%20build%202010/before1.jpg" border="0" alt="before"></a>
Here she is as I purchased her. and only $80 dollars in. I got the carbs. and all the parts except for air filters, and tailight. I've chopped the back of her off about an inch form the tank. and on the lower half about 4-5 inchs above the rear brake anchor
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
next steps started

Got the rear cut off, found a nice olive green for my tank experimented wiht rd on the back tire, I also found a tractor seat, and finally got some lil ammo can sfor bags. Here is a pseudo mock up. Im going to cut the swing arm behind the brake mount anchor closest to the engine. Then extend it about 6-7" and then weld my hard frame on to it. I'm working on fabricating the rear end hardtail now.
 

Attachments

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top