my blue h2
1 - 6 of 6 Posts
Joined
·
4,352 Posts
re
good to hear from you smokey :wink:
fantastic bike :shock: - wish i could ride it :lol:
good to hear from you smokey :wink:
fantastic bike :shock: - wish i could ride it :lol:
Joined
·
302 Posts
Nice ride, I have been trying to find one of those for years.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
1980 KZ 650 engine rebuild
Vintage Motorcyle InfoI would like to replace rod and main bearings on my KZ650, but I’m struggling to find a good source. Thought of plastic gauging them.... thoughts? Sent from my iPhone using Tapatalk- 0
- 6
-
1982 GPZ 750 owners info and parts
Vintage Motorcyle InfoAs these bike are getting long in the tooth and parts more scarce it would be nice to pool resources and knowledge in one spot. I'm thinking maintenance experience, parts, shops, mods..... Craigslist bikes/parts of interest is always a good start, so I will Shop manual March 2018 Site...- 20
- 2K
-
'78 KZ650B Fuel System Leak Mystery
Vintage Motorcyle InfoI have an interesting problem with my '78 KZ650B - I noticed recently that my #3 carb was leaking out of the overflow tube; every 45 seconds or a minute or so it would pee out of That #3 tube only - - OK, something in the needle valve, right?? I took the carbs out, opened them up, found a...- 17
- 1K
-
1986 Z550 Crank Non Start
Vintage Motorcyle InfoEvening all. Ok, this has me scratching my head now Throwing this out there as chatting sometimes makes you see what you are missing ! I done a full cosmetic restoration on this bike earlier this year. (Including powder coating the frame) The bike is a Z550GT, which I know you didn't have in...- 12
- 931
-
KZ750B float bowl drains
Vintage Motorcyle InfoMy brother's '83 Honda CB900 Custom has float bowl drain valves on its Mikuni carbs, while my '76 KZ750B1 Mikuni carbs just have plugs. Does anyone know of any drain valves that would directly fit in place of these plugs? I'm not going to steal one off my brothers Honda to see if it would fit.- 1
- 92
-
n0ukf · updated
Join now to ask and comment!