need some suggestions
Join the discussion
Recommended Reading
-
98 ZX9r - no spark, bad CDI?
Kawasaki Streetbikes/SportbikesIs anyone here really knowledgeable on the ignition system of a C1? Bought a project bike with no spark. I have gone through everything and expect a bad CDI. Looking for second opinions. All wires good no shorts or breaks Pickup coil Ohm tested good Cam sensor ohm tested good All safety...- 0
- 60
-
Removing the engine from a GPZ900R
Kawasaki Streetbikes/SportbikesHere's a tough little question. I'm in the process of removing an engine from a 1985 GPZ900R. I've removed everything that needs to be removed as per the factory service manual but the engine won't come out. The engine is held in the frame with two long bolts at the rear and two shorter ones...- 3
- 166
-
ZX-R 400 Electronic Fuel Injection conversion (EFI)
Kawasaki Streetbikes/SportbikesHello everyone, Since inline 4 cylinder, low displacement engines are not put in motorcycles anymore I would like to purchase a zxr 400. The only problem I have with the motorcycle is the carburetors. I've owned 2 carbureted motorcycles and always had trouble with the carbs. So the plan is to...- 0
- 83
-
wytse1999 · updated
-
Versys 650 front adjustable cartridges on a Z650... possible?
Kawasaki Streetbikes/SportbikesAnyone ever tried to install the adjustable suspension cartridges from a 2018 Versys 650 on a 2018 Z650? Is it possible?- 0
- 383
-
Engine light after first initial service?
Kawasaki Streetbikes/SportbikesHi there, I dropped my bike off today at the dealer to do the first initial 1,000km service. The bike is a 2018/2019 Ninja 650L and I was told it would be done in 2-3 hours(9am Drop off-12pm Pickup). When I came back they said another 10 minutes or so until 20 minutes later the dealership owner...- 2
- 421
Join now to ask and comment!