Joined
·
613 Posts
polishing tips
Join the discussion
Recommended Reading
-
Z1000 model 03
Main LobbyHi everyone I have an 03 model z1000 two weeks ago I had puncture in rear wheel I removed it took o garage for repair when putting wheel back on bike it was so hard not enough room to fit it back in once I got it back on and put calapur back on I found they only 1mm between the bolt off the...- 1
- 31
-
Seansz1000 · updated
-
Help with 1981 zn1100 B LTD
Main LobbyHello I’m new here but I needed some help and figured I could get a lot of responses on here, so I took my starter clutch off and in the process I lost track of the order of the spacers behind the flywheel, there is a brass one and a steel one, hope someone can help. oh and would it help if I...- 1
- 60
-
hydraulic lifters
Main LobbyHelp please; anyone know for sure if a 2002 voyager X11 has hydraulic lifters?- 1
- 70
-
go1dwing · updated
-
Bayou 220 No Spark
Main LobbyFirst and foremost i have no spark I have replaced the coil and voltage reg. New Spark Plug Still Nothing I can put a hot battery in and hook it up and my neutral light and stuff comes on and when i pull the rope the lights get brighter Im new at this stuff so im a dummy when it comes to the...- 0
- 40
-
JacobMayes996 · updated
-
Help with fuel system
Main LobbyCurrently, I am working on a motorcycle engine that is off of a wrecked bike(Kawaski Z1000 03-06 model). I have been working on the engine for about 3 months trying to diagnose the issues with why it won't start. I have finally figured out all the wiring issues however the bike only runs with...- 0
- 60
Join now to ask and comment!