Kawasaki Motorcycle Forums banner
1 - 1 of 5 Posts

· Registered
302 Posts
My manual says to get the ignition switch is to knock the shear bolts in a counterclock wise direction with a sharp punch and a hammer. It also says to drill holes in the middle of the bolts and use a screw extractor to back them out. I got lazy drilled the bolts out put the new switch in and put bigger bolts through the holes.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.