Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Hi Guys, how's trick's?
I recently did a minor rebuild on my GPz750 (rings, pistons) and now the thing won't idle properly. It will fire up and runs OK above 3000 rpm, but idles at 500 rpm till it stalls. I adjusted the idle screw up but then as soon as i blip the throttle it sticks at around 3-4000 rpm.
Carbs were cleaned during the rebuild, coils and leads replaced (2nd hand) air filter cleaned.
Bike was running fine till I blew it up playing in the twisties :D and dumped the oil out the air box :cry: .

Also is there any known issues with the starter motors/ignition systems on these bikes?

Thanks mate
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.