valve clearences
Join the discussion
Recommended Reading
-
KZ550 Starter Clutch?
The Mechanics CornerI have a 1981 KZ550-C that I have starter issues with and was wondering if someone could help me. The starter will not turn the bike over at all. All I get is a grinding or loose noise from inside. I figured that that the clutch was bad and bought a used one off E-bay. Started taking mine apart...- 26
- 5K
-
Backfire in 2006 Vulcan 500 with 6,000 miles
The Mechanics CornerHello, Have a 2006 Vulcan 500, 6,000 miles, that has just started to backfire. The backfire has occurred twice now (in the last 3 days). I've done some work on cars (but not so much carburetor). This is mainly my wife's bike, that I drive only a little bit. With the first backfire, she's...- 3
- 540
-
Engine Favoring One Cylinder
The Mechanics CornerHey guys. I've been in the process of rebuilding and restoring an old 1982 kawasaki kz305, and I've encountered a bit of an issue that I can't quite seem to wrap my head around. So when I plugged in both spark plugs to the boots from the coil and turned the engine over, it was discovered that...- 0
- 42
-
Vulcan 2000 problems
The Mechanics CornerI have a 2006 Vulcan 2000. It has Vance and Hines exhaust and a power commander. The battery recently died and required replacing. I put the new battery in and everything seem to be great. I went approximately 5 days without cranking it. I finally got around to firing it up..it just clicked as...- 45
- 22K
-
WEZMOTO brake lines beware!
The Mechanics CornerI purchased a set of these off ebay and they looked cool enough and the price was right so I pulled the throttle and purchased them. They arrived from England and I got to work to install them. Once I got the old lines off I noticed they had the ends turned the wrong direction and that they were...- 13
- 18K
Join now to ask and comment!