Kawasaki Motorcycle Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I just bought my first bike, which is a '04 Vulcan 500 LTD. I love the bike, but want some "flatter" pegs.

I saw where someone else is looking for pegs for their 500 LTD. Any luck? I've found some Kuryakyn pegs that I like, but they don't make an adapter that fits. It's a bummer!

Any help would be appreciated...
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Thanks for the link... These have a flatter surface, which is what I wanted to try...

http://www.metric-cruisers.com/moto...ct_info.php?cPath=93_108_179&products_id=1351

I had some of the 800 (P/N 8830, I think), but the spring on the 500 won't fit inside of the adapter. Also, there is arount 1/16" of play between the bracket and adapter. I could fill it in with a washer, but I wanted to check around before I made a cluge!

By the way... Any opinions about flat versus round driver pegs? I may start another post...
 

·
Rebel Rider
Joined
·
3,646 Posts
I haven't tried them, but someone on the VROC forum said you had to fiddle with the spring to make it fit, and there was some play but not enough to worry about.


bluestringer
 
1 - 5 of 5 Posts
Top