Kawasaki Motorcycle Forums banner

1 - 5 of 5 Posts

·
Nick A
Joined
·
1 Posts
Discussion Starter #1
Vulcan 650 S ABS - OEM Light Bar Installation Question: I have installed all the necessary parts provided by both the LED Light Bar Kit (99994-0511) and the Relay Kit(99994-0510). I don't know how to get power to the LED Light Bar? Was hoping someone could point me in the right direction.
 

·
Super Moderator
Joined
·
10,810 Posts
Normally, when using a relay to power auxiliary lighting, power for the light itself comes directly from the battery with a fuse in the circuit. We in the super sport touring world get really fancy with lighting controls and I do this stuff for a living so.....


Did you install an on/off switch? How about a light dimmer? Where did you pick up the trigger power for the relay?
 

·
Registered
Joined
·
2 Posts
Hi did you get this sorted, I have been trying to find out myself.

Vulcan 650 S ABS - OEM Light Bar Installation Question: I have installed all the necessary parts provided by both the LED Light Bar Kit (99994-0511) and the Relay Kit(99994-0510). I don't know how to get power to the LED Light Bar? Was hoping someone could point me in the right direction.
 

·
Registered
Joined
·
2,611 Posts
Have you installed the light bar kit and relay kit yet ?
The Power for the Light Bar is fed from a Male & Female plug (A) attached to the Clock wiring loom just below the clocks as shown in the first picture.



Below picture shows the connection on the light bar sub loom that plug into the Accessory connections above (A)
Please be aware NO Accessories will be powered until the Relay kit is installed !!

 

·
Registered
Joined
·
2 Posts
Have you installed the light bar kit and relay kit yet ?
The Power for the Light Bar is fed from a Male & Female plug (A) attached to the Clock wiring loom just below the clocks as shown in the first picture.



Below picture shows the connection on the light bar sub loom that plug into the Accessory connections above (A)
Please be aware NO Accessories will be powered until the Relay kit is installed !!

Hi I've not fitted it yet but found some YouTube videos of the fitting of the DC power and worked it out from there. I will be doing it this week. Thanks for the tips though.
 
1 - 5 of 5 Posts
Top