Joined
·
49 Posts
Anybody have a set of Z1000 upper and lower trees they want to get rid of?? I'm planning a 05 ZX636 fork swap on my ZRX and the Z1000 trees would be a great fit.
Wanted: Z1000 upper/lower trees
1 - 6 of 6 Posts
Joined
·
49 Posts
No replies there yet either. These things seem awfully difficult to find.
Joined
·
1 Posts
Hi I can help you out
I know I'm a new guy here but I got the gods
I have the upper triple clamp with the risers.
I also have the lower triple clamp but I had to use the steering stem on my own Z1000.
Since you are using the triples on your ZRX you will most likely need to use your stem from your triple clamps.
You need to find a shop that can press out your stem from the ZRX and press it in to the lower Z1000 triple.
I saw a set on ebay that sold for $200 but thats crazy imo.
If you want my triples send me an email or pm me I figure $100 is fair??
Greyhound goes everyday to Ontario and usually takes 5-7 days.
Mike Vancouver bc
I know I'm a new guy here but I got the godsI have the upper triple clamp with the risers.
I also have the lower triple clamp but I had to use the steering stem on my own Z1000.
Since you are using the triples on your ZRX you will most likely need to use your stem from your triple clamps.
You need to find a shop that can press out your stem from the ZRX and press it in to the lower Z1000 triple.
I saw a set on ebay that sold for $200 but thats crazy imo.
If you want my triples send me an email or pm me I figure $100 is fair??
Greyhound goes everyday to Ontario and usually takes 5-7 days.
Mike Vancouver bc
Joined
·
3,034 Posts
These are difficult because the 650R uses the same ones if the rider wants to keep handlebars. I remember seeing just how scarce when I was planning my front end swap.
So between the fact that there are plenty of riders after a SMALL used supply, and I doubt tooo many Z1Ks have been trashed...
So between the fact that there are plenty of riders after a SMALL used supply, and I doubt tooo many Z1Ks have been trashed...
Joined
·
49 Posts
Hey Mike,Hi I can help you out
I have the upper triple clamp with the risers.
I also have the lower triple clamp but I had to use the steering stem on my own Z1000.
Since you are using the triples on your ZRX you will most likely need to use your stem from your triple clamps.
You need to find a shop that can press out your stem from the ZRX and press it in to the lower Z1000 triple.
I saw a set on ebay that sold for $200 but thats crazy imo.
If you want my triples send me an email or pm me I figure $100 is fair??
Greyhound goes everyday to Ontario and usually takes 5-7 days.
Mike Vancouver bc
What year are these trees from? Will they fit my '05 636 forks?? Can you post some pics??
I have a spare ZRX stem so that is not an issue.
Thanks.
1 - 6 of 6 Posts
