where is oil level window
Join the discussion
Recommended Reading
-
2009 Ninja 250 will not start
The Mechanics CornerHello, I purchased a used 2009 Ninja 250r a month ago. It initially had 6k miles on it. I have put 1500 on it since. Since I purchased the machine, it has always just started. On Friday I went to a friends house after work. It started right up per usual. When I went to leave his house, the...- 9
- 6K
-
Part number for VN800 - exhaust nut studs
The Mechanics CornerI've been pouring over diagrams trying to find this part - the nuts and studs they bolt to on my bike are pretty rusty, so I figured the next time I pull the exhaust off I'll change them. I found the part number for the nuts, but I can't find the stud anywhere. I'm talking about the threaded...- 7
- 1K
-
1985 Z550 Front Fork Issues
The Mechanics CornerI have an 85 Z550 which I am playing with. the front fork stanchions are pitted so I bought a new (to me) pair. However when I stripped down the bike I found the replacements were 36mm and the originals were 35mm. Now I have the dilema of whether to source another set of forks or stanchions or...- 2
- 77
-
Engine swop
The Mechanics CornerCan I fit a 650 s Vulcan engine into a 2007 650 versus. My engine has a hole in the block.I checked the engine is the same except for power output- 0
- 62
-
Kawasaki KX80 Clutch issues...I'M COMPLETELY LOST WITH THIS ONE!
The Mechanics CornerHi to the forum members. I use this forum a lot for when my bike breaks...usually on a regular basis. Anyway...the clutch was sticking on my KX 80 (1998) so I removed the cluch, removed and filed the basket groves down, replaced the clutch and reconnected the cable. Now I have no tension on the...- 2
- 539
Join now to ask and comment!