Will 95 KX 250 front forks fit on a 98 KX 125?
Join the discussion
Recommended Reading
-
Aluminum engine degreaser?
The Mechanics CornerI usually use Gunk engine degreaser on my car engines, but I've read that iron engine degreasers are NOT good for aluminum engines! So what is a good product for aluminum? Someone said the Gunk Foamy spray won't hurt aluminum. Correct??- 14
- 9K
-
My Reliable 85 ZN700 has a problem!
The Mechanics CornerYesterday, when I went for a ride on my ZN700, it started bogging when I twisted the throttle and seemed to do it worse in the higher gears. Then, the engine would only rev up high and stay there. I wasn't far from home and managed to make it back by braking to keep the engine rpm down and...- 18
- 956
-
crash bars
The Mechanics Cornerwere crash bars a factory option on a kawasaki kz 440 say from 1980-1983? i seen a set oo ebay for a 1982 kawasaki kz 440, but i'm wondering if their aftermarket or factory...- 15
- 3K
-
Non Start 07 KLX250s.. CDI INFO NEEDED>> HELPPP
The Mechanics Corner2007 Kaw KLX250s 12K Mi. EXC Condition. Rides Perfect when she runs. This is the second time I have had no spark at the plug. Coil does have very faint 2-5 volts. I pulled the CDI off, I have continuity through the pickup wires and connection to the coil. I CAN NOT FIND A SOLID WIRING...- 8
- 4K
-
Ninja 300ABS 2013 not cranking + relay click
The Mechanics CornerHello, I would like to ask for your help diagnosing my bike's starting issue. Long story short: the starter won't turn, but once I manage to push-start the bike, the bike runs perfectly. The starter turns when the engine is on most of the time. Full story: What is the problem? When I push the...- 2
- 559
-
Potatomaster · updated
Join now to ask and comment!